One for All URC-8910 Programming Volume Unlock

Programming Volume Unlock
1. On the URC-8910 remote control,press and hold
SETuntil you see the display change from the
current device and time to [CODE SET].
2. (x 5) Press the ▼key five times until you see the display
change to [VOL UNLOCK].
NOTE:If you go past [VOL UNLOCK],press the ▲ key one or
more times to return to it.
3. Press SELECTonce to beg in programming. You will
see the display change to [ALL MODE].
To unlock one mode,skip to step 4.Otherwise press
SELECTonce to unlock all modes.You will see the
display change to[UNLOCKED] and then [EXIT SETUP]
as the remote control automatically exits the pro-
gramming mode and returns to normal operation.
4. or (Optional) Press ▲(or ▼) once.You will see the
display change to [ONE MODE].
a. Press SELECT once.You will see the display change
to[SEL MODE].
b.Press a mode key once (e.g., TV) to unlock it.
You will see the display change to [UNLOCKED]
and return to [SEL MODE].
c. If desired,repeat step 4b as needed to unlock
volume controls for other devices.Otherwise,
press EXITto exit the programming mode. You
will see an [EXIT SETUP]message as the remote
control returns to normal op eration.
20
Producer 2002 IR Mnl 4/4/02 10:01 AM Page 33