46
Use VOL+(or VOL-) to raise (or lower) the
audio turntable’s audio volume (ifapplicable).
Press MUTE once to turn the audio tu rntable’s
audio offor on (if applicable).
Use the keypad (1~ 9and 0) to
directly select tracks.If the original
remote control requi red pressing an
Enter key to select a track,also press
the ENTERkey after the track number
(e.g.,1-2-ENTER).
Use the transport keys to control
your audio turntable (ifapplicable).
After programming, press M1 ~ M3 once to
run a desired macro (see Using Macros on
page 34).
After programming,press L1~ L4
once to activate a learned function .
See Using Learning on page 29.
Use to turn on or off the key b acklight.
When this feature is activated,keys will
remain backlit for 5 seconds after the last key
press.In the setup mode,backlighting
will remain on for 30 seconds.
Use SETfor all programming sequences.
Producer 2002 IR Mnl 4/4/02 10:02 AM Page 59