Onkyo DV-CP706 instruction manual Operating Setting Menu, Parental Lock, Change the Security Code

Configuring the DV-CP706—Continued

Operating Setting Menu

Parental Lock

With the Parental Lock function you can block access to certain scenes that the authors have flagged as being unsuitable for children.

To use parental lock, you must set a security code.

1	Select “Operation Setting” menu
2	in the setup.
	Use the navigation [ ]/[ ]/[ ]/[ ]
	buttons to select “Parental
Remote controller Lock”, and then press the
	[ENTER] button.
	The security code input screen appears.

3 Enter the security code using the

Remote controller remote controller’s number but- tons, and then press the [ENTER]

button.

The default security code is “8888.” You can change the security code in the next step.

4	Use the Up/Down [ ]/[ ] buttons
	to change the level of parental

Remote controller lock, and then press the [ENTER] button.

At level 8 parental lock is off, with level 1 being the strictest level.

Notes:

•When entering a security code, you can use the [CLR] button to delete the numbers entered so far, if neces- sary.

•Not all discs use parental lock. See the disc’s sleeve notes for details.

•Discs with parental lock may cut certain scenes, replace certain scenes with children-friendly scenes, or prevent playback of the entire disc.

Change the Security Code

To change the Security Code, confirm your existing code then enter a new one.

1	Select “Operation Setting” menu
	in the setup.

2	Use the navigation [ ]/[ ]/[ ]/[ ]
	buttons to select “Security
Remote controller Code”, and then press the
	[ENTER] button.
	The security code input screen appears.

3 Enter the existing security code

Remote controller using the remote controller’s number buttons, and then press

the [ENTER] button.

The default security code is “8888.” Even if a new security code has been entered, the code “8888” can still be used.

Once the security code has been entered, the new security code input screen appears.

4	Enter the new security code
Remote controller using the remote controller’s
	number buttons, and then press
	the [ENTER] button.
	The new security code has been set.

Note:

•If you forget your security code, enter “8888” instead. “8888” is a security code that can always be used.

48