Onkyo HT-R980 About AV Connections, Connected image with AV components, AV Cables and Jacks

About AV Connections

Connected image with AV components

HDMI cable : Video & Audio

AV receiver

	Blu-ray Disc/
TV, projector, etc.	DVD player	Game console

Other cables	: Video
	: Audio

AV receiver

	Blu-ray Disc/
TV, projector, etc.		Game console
	DVD player

•Before making any AV connections, read the manuals supplied with your AV components.

•Don’t connect the power cord until you’ve completed and double-checked all AV connections.

•Push plugs in all the way to make good connections (loose connections can cause noise or malfunc- tions).

•To prevent interference, keep audio and video cables away from power cords and speaker cables.

AV Cables and Jacks

Right!

Wrong!

Signal	Cable	Jack		Description
Video and	HDMI		HDMI	HDMI connections can carry digital video and audio.
Audio

Video Component video Y

Green

Component video separates the luminance (Y) and color

PB/CB

difference signals (PB/CB, PR/CR), providing the best pic-

Blue ture quality (some TV manufacturers label their compo-

PR/CR

Red

nent video sockets slightly differently).

Composite video	Yellow	Composite video is commonly used on TVs, VCRs, and
V		other video equipment.

Audio	Optical digital
	audio

OPTICAL	Optical digital connections allow you to enjoy digital
	sound such as PCM*, Dolby Digital or DTS. The audio
	quality is the same as coaxial.

Coaxial digital	Coaxial digital connections allow you to enjoy digital
audio	Orange sound such as PCM*, Dolby Digital or DTS. The audio
	quality is the same as optical.

Analog audio (RCA)

L

R

White	Analog audio connections (RCA) carry analog audio.
Red

1/8" (3.5 mm)	This cable carries analog audio.
Stereo mini plug

*Available sampling rate for PCM input signal is 32/44.1/48/88.2/96 kHz. Even 176.4/192 kHz is effective in case of the HDMI con- nection.

Note

•The AV receiver does not support SCART plugs.

•The AV receiver’s optical digital jacks have shutter-type covers that open when an optical plug is inserted and close when it’s removed. Push plugs in all the way.

Caution

•To prevent shutter damage, hold the optical plug straight when inserting and removing.

En

14