Onkyo HT-R980 Input/Output Assign, Monitor Out, HDMI Input, Explanatory Notes, Subwoofer

Explanatory Notes
a	Main Menu	Speaker Setup
b	Subwoofer
c	Yes:

Select if a subwoofer is connected.

No:

Select if no subwoofer is connected.

aMenu selection

bSetting target

cSetting options (default setting underlined)

Input/Output Assign

Main Menu Input/Output Assign

Monitor Out

You can specify the output resolution for the HDMI OUT and COMPONENT VIDEO MONITOR OUT and have the AV receiver upconvert the picture resolution as neces- sary to match the resolution supported by your TV.

■Resolution

`Through:

Select this to pass video through the AV receiver at the same resolution and with no conversion.

`Auto:

Select this to have the AV receiver automatically convert video at resolutions not supported by your TV.

`480p (480p/576p):

Select this for 480p or 576p output and video con- version as necessary.

`720p:

Select this for 720p output and video conversion as necessary.

`1080i:

Select this for 1080i output and video conversion as necessary.

`1080p:

Select this for 1080p output and video conversion as necessary.

HDMI Input

If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2, you must assign “HDMI2” to the “BD/DVD” input selector.

If you’ve connected your TV to the AV receiver with an HDMI cable, composite video and component video sources can be upconverted* to HDMI. See “Video Con- nection Formats” for more information on video signal flow and upconversion (➔ 18).

Composite video,
component video	HDMI
	IN
	OUT
Composite video,	HDMI
component video

Here are the default assignments.

Input selector	Default assignment
BD/DVD	HDMI1
VCR/DVR	HDMI2
CBL/SAT	HDMI3
GAME	HDMI4
AUX	- - - - -
TUNER	- - - - - (Fixed)
TV/CD	- - - - -
PORT	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD, PORT

`HDMI1, HDMI2, HDMI3, HDMI4:

Select a corresponding HDMI input that the video component has been connected.

`- - - - -:

Select this to output composite video and component video sources from the HDMI OUT. The video sig- nal from HDMI output is configured in “Component Video Input” (➔ 38).

•Each HDMI input cannot be assigned to two input selec- tors or more. When HDMI1 - HDMI4 have already been assigned, you must set first any unused input selec- tors to “- - - - -” or you will be unable to assign HDMI1 - HDMI4 to input selector.

Note

•When an HDMI IN is assigned to an input selector as explained here, the same HDMI IN will be set as a priority in the “Digital Audio Input” (➔ 38). In this case, if you want to use the coaxial or optical audio input, make the selection in the Audio Selector in the Audio menu (➔ 22).

•TUNER selector cannot be assigned and is fixed at the “- - - - -” option.

•If you connect a component (such as UP-A1 Dock that seated iPod) to UNIVERSAL PORT jack, you cannot assign any input to PORT selector.

•Do not assign the component connected with the HDMI input to TV/CD selector when you set “TV Control” setting to “On” (➔ 50). Otherwise, appropriate CEC (Consumer Electronics Control) operation will not be guaranteed.

En

37