Onkyo HTX-22HD instruction manual Changing the Input Display

First Time Setup—Continued

4	Use the Up and Down [ ]/[ ]
	buttons to select an input
	selector, and use the Left and
	Right [ ]/[ ] buttons to
	select:
	HDMI1:Select if the component
	is connected to HDMI IN 1.
	HDMI2:Select if the component
	is connected to HDMI IN 2.
	- - - - -:Select if you’re not using
	the HDMI OUT.
5	Press the [SETUP] button.
	Setup closes.

Notes:

•Each HDMI IN can be assigned to only one input selector. Before you assign an HDMI IN to an input selector, you must change the default HDMI1 or HDMI2 assignment to “-

- - - -” first.

•When an HDMI IN is assigned to an input selector as explained here, the audio input for that input selector is automatically set to the same HDMI IN. See “Audio Input Setup” on page 36.

Changing the Input Display

If you connect an -capable Onkyo Mini- Disc recorder, CD recorder, or RI Dock to the HTX-22HD’s LINE 1 or LINE 2 input, for to work properly, you must change this setting.

INPUT

1	Use HTX-22HD’s [INPUT] but-
	ton to select the TAPE input
	selector so that “TAPE”
	appears on the display.

2 Press and hold down the [INPUT] button (about 3 sec- onds) to change the setting.

Repeat this step to select MD, CDR, or DOCK.

From TAPE, the setting changes in the following order:

38