Onkyo HTX-22HD instruction manual PowCtrl Power Control, TV Ctrl Control, Advanced Setup—Continued

Advanced Setup—Continued

•Select Disable if a connected component is incompatible or you’re not sure about its compatibility.

•If operation is unreliable when set to Enable, select Disable instead.

•When the Audio TV Out setting is set to On, or TV Control is set to Enable and you’re listening through your TV’s speak- ers (see page 24), if you turn up the HTX- 22HD’s volume control, the sound will be output by the HTX-22HD’s speakers. To stop the HTX-22HD’s speakers producing sound, change the settings, change your TV’s settings, or turn down the HTX- 22HD’s volume.

PowCtrl (Power Control)

To link the power functions of RIHD-compat- ible components connected via HDMI, select Enable.

Disable: Power Control disabled.

Enable: Power Control enabled.

Notes:

•The Power Control setting can be set only when the above Control setting is set to Enable.

•HDMI power control only works with RIHD-compatible components that support it and may not work properly with some components due to their settings or com- patibility.

•When set to Enable, the HTX-22HD con- sumes more power when on Standby.

•When set to Enable, the HTX-22HD enters Ready mode when set to Standby, and the STANDBY indicator lights up.

•When set to Enable, regardless of whether the HTX-22HD is On or on Standby, video received by an HDMI input will be output by the HDMI OUT for playback on the TV or other component that’s connected to the HDMI OUT. If the Audio TV Out setting is set to On, then HDMI audio will also be output by the HDMI OUT.

TV Ctrl (Control)

Select Enable to control the HTX-22HD from an RIHD-compatible TV connected via HDMI.

Disable: TV Control disabled.

Enable: TV Control enabled.

Notes:

•Select Disable if your TV is incompatible or you’re not sure about its compatibility.

•The TV Control setting can be set only when the above Control and Power Control settings are both set to Enable.

•When the Audio TV Out setting is set to On, and the Power Control setting is set to Enable, regardless of whether the HTX- 22HD is On or on Standby, both audio and video received by an HDMI input will be output by the HDMI OUT for playback on your TV or other component that’s con- nected to the HDMI OUT.

Note:

•After changing the Control, Power Control, or TV Control setting, be sure to turn all of your components off and then back on again. Refer to the instruction manuals for your other components.

69