Onkyo HTX-22HD Audio TV Out, Lip Sync, x.v.Color, Control, Advanced Setup—Continued

Advanced Setup—Continued

Audio TV Out

This setting determines whether audio received by an HDMI input is output by the HDMI OUT. You may want to change this setting to On if your TV is connected to the HDMI OUT and you want to listen to audio from an HDMI component through your TV’s speakers instead of the HTX-22HD’s speak- ers. Normally, this should be set to Off.

Off: HDMI audio is not output (default).

On: HDMI audio is output.

Notes:

•If On is selected and the signal can be out- put by the TV, the HTX-22HD’s speakers will output no sound.

•When TV Control is enabled, this setting is set to Auto.

•With some TVs and input signals, no sound may be output even if On is selected.

•When the Audio TV Out setting is set to On, or TV Control is set to Enable and you’re listening through your TV’s speak- ers (see page 25), if you turn up the HTX- 22HD’s volume control, the sound will be output by the HTX-22HD’s speakers. To stop the HTX-22HD’s speakers producing sound, change the settings, change your TV’s settings, or turn down the HTX- 22HD’s volume.

Lip Sync

The Lip Sync function can automatically syn- chronize HDMI audio and video that’s gotten out of sync due to the complex digital video processing being performed by your HDMI- compatible TV. With HDMI Lip Sync, the audio delay required to synchronize the audio and video is calculated and applied automati- cally by the HTX-22HD.

Disable: HDMI lip sync disabled.

Enable: HDMI lip sync enabled.

Notes:

•This function works only if your HDMI- compatible TV supports HDMI Lip Sync.

•You can check the amount of delay being applied by the HDMI Lip Sync function on the A/V Sync screen (see page 65).

x.v.Color

With this setting you can enable or disable x.v.Color. To use x.v.Color, the HDMI source and HDMI TV must both support x.v.Color.

Disable: x.v.Color disabled.

Enable: x.v.Color enabled.

Control

This function allows RIHD-compatible com- ponents connected via HDMI to be controlled with the HTX-22HD.

Disable: RIHD disabled.

Enable: RIHD enabled.

Notes:

•RIHD, which stands for Remote Interactive over HDMI, is the name of the system con- trol function found on certain Onkyo com- ponents. The HTX-22HD can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however, operation with com- ponents other than RIHD-compatible com- ponents and recommended components cannot be guaranteed.

68