Onkyo HTX-22HD instruction manual 2 3 4 5, Advanced Setup—Continued

Advanced Setup—Continued

2

3

4

5

Use the Up and Down []/[ ] buttons to select “2. Speaker Setup,” and then press [ENTER].

Use the Up and Down []/[ ] buttons to select “Level Cal,” and then press [ENTER].

A pink noise test tone is output by the front left speaker.

Turn up the volume so that you can hear the test tone suffi- ciently.

The name of the speaker cur- rently outputting the test tone is shown on the display.

Use the Left and Right []/[ ] buttons to adjust the speaker level, and use the Down [ ] button to select the next speaker.

The levels can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the sub- woofer).

You can adjust the levels for the following speakers:

Left: Front left speaker. Center: Center speaker.

Right: Front right speaker. Surr R: Surround right

speaker.

Surr BkR: Surround back right

speaker.

Surr BkL: Surround back left

	speaker.
	Surr L: Surround left
	speaker.
	Subwfr: This subwoofer.
	Notes:
	• Speakers that you set to No or
	None in the “Speaker Config-
	uration” on page 56 cannot be
	selected.
	• When you play source mate-
	rial that contains no informa-
	tion in the LFE (Low
	Frequency Effects) channel,
	the subwoofer will produce no
	sound.
6	Repeat step 5 so that the level
	of the test tone coming from
	each speaker is the same.
7	Press the [SETUP] button.

Setup closes.

Don’t forget to turn down the volume if you turned it up while setting the levels.

Note:

•To return to the previous menu, press the [RETURN] button.

•These levels can also be adjusted by using the [TEST TONE] button on the remote

controller. Press the [TEST TONE] button to output the test tone. Use the [CH SEL] button to select each speaker, and use the Left and Right []/[ ] buttons to adjust the level.

61