If the video source is connected to an HDMI input,

15, 40

you must assign that input to an input selector, and

 

your TV must be connected to the HDMI OUT.

 

 

 

(European, Australian and Asian models) While

31

the Pure Audio listening mode is selected, the video

 

circuitry is turned off and only video signals input

 

through HDMI IN can be output.

 

 

 

On your TV, make sure that the video input to which — the AV receiver is connected is selected.

There’s no picture from a source connected to an HDMI IN

Reliable operation with an HDMI-to-DVI adapter is 72 not guaranteed. In addition, video signals from a PC are not guaranteed.

The on-screen menus don’t appear

On your TV, make sure that the video input to which — the AV receiver is connected is selected.

When the AV receiver is not connected to a TV via — HDMI, onscreen menus are not displayed.

Tuner

Reception is noisy, FM stereo reception is noisy, or the FM STEREO indicator doesn’t light

Relocate your antenna.

Move the AV receiver away from your TV or

computer.

 

Listen to the station in mono.

26

 

 

When listening to an AM station, operating the

remote controller may cause noise.

 

Passing cars and airplanes can cause interference.

 

 

Concrete walls weaken radio signals.

 

 

If nothing improves the reception, install an outdoor — antenna.

Remote Controller

The remote controller doesn’t work

Before operating this unit, be sure to press

RECEIVER.

 

 

 

Make sure that the batteries are installed with the

4

correct polarity.

 

Install new batteries. Don’t mix different types of

4

batteries, or old and new batteries.

 

 

 

Make sure that the remote controller is not too far

4

away from the AV receiver, and that there’s no

 

obstruction between the remote controller and the

 

AV receiver’s remote control sensor.

 

Make sure that the AV receiver is not subjected to

direct sunshine or inverter-type fluorescent lights.

 

Relocate if necessary.

 

 

 

If the AV receiver is installed in a rack or cabinet

with colored-glass doors, the remote controller may

 

not work reliably when the doors are closed.

 

Make sure you’ve selected the correct remote

10, 57

controller mode.

 

 

 

When using the remote controller to control other

manufacturers’ AV components, some buttons may

 

not work as expected.

 

Make sure you’ve entered the correct remote control

56

code.

 

Make sure to set the same ID on both the AV

46

receiver and remote controller.

 

 

 

Can’t control other components

If it’s an Onkyo component, make sure that the u

17

cable and analog audio cable are connected properly.

 

Connecting only an ucable won’t work.

 

 

 

Make sure you’ve selected the correct remote

10, 57

controller mode.

 

If you’ve connected an cassette tape deck to the

37

TV/CD IN jack, or an RI Dock to the TV/CD IN or

 

GAME IN or VCR/DVR IN jacks, for the remote

 

controller to work properly, you must set the input

 

display appropriately.

 

 

 

If you cannot operate it, you will need to enter the

56

appropriate remote control code.

 

To control another manufacturer’s component, point

56

the remote controller at that component.

 

 

 

To control an Onkyo component that’s connected

56

via u, point the remote controller at the AV

 

receiver. Be sure to enter the appropriate remote

 

control code first.

 

To control an Onkyo component that’s not

56

connected via u, point the remote controller at the

 

component. Be sure to enter the appropriate remote

 

control code first.

 

 

The entered remote control code may not be correct. —

If more than one code is listed, try each one.

 

 

 

UP-A1 Dock for iPod/iPhone

There’s no sound

Make sure your iPod/iPhone is actually playing.

Make sure your iPod/iPhone is inserted properly in

the Dock.

 

Make sure the UP-A1 Dock is connected to the

UNIVERSAL PORT jack on the AV receiver.

 

 

Make sure the AV receiver is turned on, the correct —

input source is selected, and the volume is turned up.

 

Make sure the plugs are pushed in all the way.

 

 

Try resetting your iPod/iPhone.

 

 

There’s no video

Make sure that your iPod/iPhone models TV OUT

setting is set to On.

 

 

 

Make sure the correct input is selected on your TV

or the AV receiver.

 

Some versions of the iPod/iPhone do not output

video.

 

The AV receiver’s remote controller doesn’t control your iPod/iPhone

Make sure your iPod/iPhone is properly inserted in — the Dock. If your iPod/iPhone is in a case, it may not connect properly to the Dock. Always remove your iPod/iPhone from the case before inserting it into the Dock.

The iPod/iPhone cannot be operated while it’s

 

displaying the Apple logo.

 

 

Make sure you’ve selected the right remote mode.

 

When you use the AV receiver’s remote controller, —

 

point it toward your AV receiver.

 

En

 

 

61

Page 61
Image 61
Onkyo TX-NR509 instruction manual Tuner, Remote Controller, UP-A1 Dock for iPod/iPhone

TX-NR509 specifications

The Onkyo TX-NR509 and HT-S6405 combination presents an impressive entry point into the world of home theater systems, delivering remarkable audio performance and convenient features for the everyday user. The TX-NR509 is a powerful 7.1-channel AV receiver that boasts a rich assortment of technologies designed to elevate movie and music experiences.

One of the most notable features of the TX-NR509 is its ability to handle high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats ensure that soundtracks are delivered with impeccable clarity and depth, making them a perfect pairing for a high-definition viewing experience. Additionally, the receiver supports various audio formats, including FLAC and WAV, providing full compatibility with lossless audio files and ensuring audiophiles can enjoy their favorite tracks without degradation.

In terms of connectivity, the TX-NR509 is equipped with six HDMI inputs, allowing users to connect multiple devices easily, including Blu-ray players, gaming consoles, and streaming devices. One HDMI output supports Audio Return Channel functionality, streamlining the connection between TV and receiver and enhancing convenience, particularly for late-night TV viewing.

The HT-S6405 complements the TX-NR509 by including a complete 5.1 speaker package designed to create a comprehensive surround sound experience. The compact satellite speakers and an impressive subwoofer work harmoniously to deliver a balanced soundstage with deep bass and crisp highs. The subwoofer, with its dedicated amplifier, ensures that the low frequencies resonate richly, perfect for both action-packed movies and subtle musical nuances.

The combination also features Onkyo's proprietary AccuEQ technology, which offers room calibration for optimizing audio settings based on the unique acoustics of any space. This ensures that users experience sound that is well balanced and tailored to their environment.

Supporting the latest in streaming capabilities, the TX-NR509 includes built-in internet radio and streaming via vTuner, as well as USB connectivity for easy access to digital music files from various sources. With its user-friendly interface, setting up this system is straightforward, making it a fantastic option for users who want high-quality sound without a complicated setup process.

In summary, the Onkyo TX-NR509 and HT-S6405 offer a remarkable blend of technology, sound performance, and user-centric features, making it an excellent choice for a home theater setup. Its combination of high-definition audio support, seamless connectivity, and advanced calibration technology positions it as a reliable option for enhancing entertainment at home.