Tuner
■AM/FM Freq Step (North American and Taiwan models)
`10kHz/200kHz:
`9kHz/50kHz:
Select the frequency step according to your area.
■AM Freq Step (European, Australian and Asian models)
`10kHz:
`9kHz:
Select the frequency step according to your area. For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area. Note that when this setting is changed, all radio presets will be deleted.
Auto Standby
■Auto Standby
`Off
`On
When “Auto Standby” is set to “On”, AV receiver will automatically enter Standby mode if there is no operation for 30 minutes with no audio and no video signal input. “Auto Standby” will appear on the display and OSD 30 seconds before the Auto Standby comes on.
Default setting: On (European, Australian and Asian models), Off (North American and Taiwan models)
Note
•With some sources, the Auto Standby function may activate itself during playback.
•The Auto Standby function does not work when Zone 2 is on.
UP-A1
■UP-A1 ChargeMode
`Auto:
Power feeding is interrupted when your iPod/iPhone is fully charged.
`On:
Power feeding continues even if your iPod/iPhone is fully charged.
`Off:
Your iPod/iPhone is not charged.
You can specify how the power is fed to your iPod/iPhone when the AV receiver is in Standby Mode.
Note
•This setting cannot be selected when:
–the
–the docked iPod/iPhone model is not supported.
•When the
En
47