Changing the Input Display
When you connect an
This setting can be done only from the front panel.
1 Press TV/CD, GAME or VCR/DVR.
“TV/CD”, “GAME” or “VCR/DVR” appears on the display.
2 Press and hold down the same button (about
3 seconds) to change the input display.
Repeat this step to select the desired input display.
■TV/CD:
TV/CD → DOCK
→ |
| |
| ||
TAPE | ||
| ||
| → |
■GAME:
GAME ↔ DOCK
■VCR/DVR:
VCR/DVR ↔ DOCK
Note
•DOCK cannot be selected for multiple input selectors at the same time.
•Enter the appropriate remote control code before using the remote controller for the first time (➔ page 56).
Using the Music Optimizer
The Music Optimizer function enhances the sound quality of compressed music files.
1 (North American and Taiwan models) Press MUSIC OPTIMIZER on the front panel.
The M.Opt indicator lights on the display.
The MUSIC OPTIMIZER indicator lights on the front panel.
Tip
•Alternatively, you can use the remote controller’s HOME and arrow buttons.
•See “Music Optimizer” for more details (➔ page 51).
Muting the AV Receiver
You can temporarily mute the output of the AV receiver.
1 Press RECEIVER followed by MUTING.
The output is muted and the MUTING indicator flashes on the display.
Tip
•To unmute, press MUTING again or adjust the volume.
•Muting is automatically cancelled when the AV receiver is set to Standby.
Using Headphones
1 Connect a pair of stereo headphones with a standard plug (1/4 inch or 6.3 mm) to the
PHONES jack.
Note
•Always turn down the volume before connecting your headphones.
•While the headphones plug is inserted in the PHONES jack, the speakers are turned off.
•When you connect a pair of headphones, the listening mode is set to Stereo, unless it’s already set to Stereo, Mono, Direct, or Pure Audio (European, Australian and Asian models).
•If you connect an iPod or iPhone to the USB port on this device, no sound will be output from the headphones jack.
Recording
This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources.
AV Recording
Audio sources can be recorded to a recorder (e.g., cassette tape deck, CDR, MD recorder). Video sources can be recorded to a video recorder (e.g., VCR, DVD recorder).
1 | Use the input selector buttons to select the source |
| that you want to record. |
| You can watch the source while recording. The AV |
| receiver’s MASTER VOLUME control has no effect |
| on recording. |
2 | On your recorder, start recording. |
3 | On the source component, start playback. |
| If you select another input source during recording, |
that input source will be recorded.
En
37