Onkyo TX-SR800 Setup Menu

Setup Menu

When making the various settings required to configure your TX-SR800 for optimum performance, you can either use the OSD Menu that appears on your television monitor or you can use the display on the front of the TX-SR800. The OSD Menu is a settings menu that is displayed on your TV monitor. For your reference when performing the setting procedures, this manual shows both the OSD Menu displayed on your television monitor and the display on the front of the TX-SR800.

The Setup Menu consists of the Basic Menu that is divided up into 4 menus, the Hardware Setup Menu, Speaker Setup Menu, Input Setup Menu, and Audio Adjust Menu, and the Advanced Menu that contains the menus of the Basic Menu plus the Preference Menu. These menus are then divided up into various sub-menus, and these contain settings for you to optimize your home theater as you wish.

The display shown below is an example. The actual contents of your display may differ depending on the model of your region and the selected input source.

0.Hardware Setup

1.Speaker Impedance

Basic Menu

2.Surr Back/Zone2

Your TX-SR800 is provided with a

3.IR IN Setup

Basic Menu for those who are not

4.AM Frequency Setup

familiar with many of the advanced

ENTERQuit:SETUP

settings of an AV receiver or those

who wish to watch movies and listen

1.Speaker Setup

to music with the minimal amount of

setup. With the Basic Menu, the

1.Speaker Config

settings that rarely need to be set or

that are only needed for advanced

2.Speaker Distance

fine-tuning of the sound quality are

3.Level Calibration

not displayed.

ENTERQuit:SETUP

Basic Menu

0.Hardware Setup

2.Input Setup

1.Speaker Setup

Input:DVD

2.Input Setup

1.Digital Setup

3.Audio Adjust

2.Multichannel Setup

3.Video Setup

→Advanced Menu

4.Character Input

5.IntelliVolume

6.Listening Mode Preset

ENTERQuit:SETUP

3.Audio Adjust

1.Tone Control

2.Surround Speakers

3.Sound Effect

Note:

3.Sound Effect

4.Delay

Once you complete the settings in the Hardware

5.LFE Level

→default

6.Mono

Setup Menu, the menu will not appear again when

7.Theater Dimensional

8.Surround

you enter the Basic Menu.

3.Audio Adjust

Advanced Menu

9.THX

The Advanced Menu provides features such as the Listening Mode Presets that allow

10.Mono Movie

you to customize the output sound for movies and music just the way you like and the

11.Enhanced 7

AV Sync Setup that allows you to adjust for discrepancies between the video and audio

12.Orchestra

13.Unplugged

timing. Settings listed with

next to their name are settings that can be set

14.Studio Mix

using the Advanced Menu.

15.TV Logic

→default

Advanced Menu

4.Preference

0.Hardware Setup

1.Volume Setup

1.Speaker Setup

2.Input Setup

2.HeadphonesLevelSetup

3.Audio Adjust

4.Preference

3.OSD Setup

→Basic Menu

4.OSD Position

ENTERQuit:SETUP