Preference

4. Preference Menu

Advanced Menu

4.Preference

1.Volume Setup 2.Headphones Level 3.OSD Setup 4.OSD Position

ENTERQuit:SETUP

4-1. Volume Setup Sub-menu

This sub-menu allows you to make various settings concerning the volume control of the TX-SR800.

Advanced Menu

4.Preference

4-1.Volume Setup

a.Volume Display :Absolute

b.Muting Level

:-oodB

c.Maximum Volume

:Off

d.Power On Volume :Last

Quit:SETUP

a. Volume Display

You can choose from two ways of displaying the volume setting on screen.

Absolute: This displays the volume with a minimum of 0 for no sound and a maximum of 100. As a reference, the volume setting of Ref (82) is equivalent to 0 decibels for the relative display method.

Relative: This displays the volume as a decibel value on a scale with a designated reference point that is displayed as 0, which equals the volume setting of 82 of the absolute display method. With this display method, the minimum value is –∞, the next highest is –81, and the maximum value is +18.

b. Muting Level

This sets the attenuation level during playback when the MUTING button is pressed on the remote controller. This can be set to

–∞, or between –50 and –10 decibels in 10-decibel increments.

c. Maximum Volume

This setting allows you to set the maximum volume that can be output with the MASTER VOLUME dial. Setting a maximum volume allows you to prevent components from being damaged by excessively loud volumes. For the absolute volume display method, this can be set between 50 and 99. For the relative volume display method, this can be set between –32 and +17 decibels. To not set a maximum volume, select “Off.”

d. Power On Volume

This sets a designated volume for which the TX-SR800 will be set to every time that the power is turned on. This prevents the TX-SR800 from suddenly outputting very loud sounds if it is turned on while it is set to an extremely high volume. For the absolute volume display method, this can be set between 0–100. For the relative volume display method, this can be set between –∞,–81 and +18 decibels. To have the TX-SR800 turned on with its current volume setting, set this to “Last.”

59