Hardware Setup
0-3. IR IN Setup Sub-menu

Advanced Menu

0.Hardware Setup

0-3.IR IN Setup

a.Position :Main

Quit:SETUP

This sub-menu allows you to set where you will be using the remote controler when you are using it in conjunction with the IR IN terminal. (i.e. remote controller signals are input at the IR IN terminal)

Main: Select when you have a remote sensor for the remote controller connected to the IR IN terminal in the main room.

Zone 2: Select to perform the remote zone (Zone 2) opereations from the remote zone.

0-4. AM Frequency Step Sub-menu (Worldwide model Only)

a. Frequency Step

This sub-menu only appears on the worldwide model. The setting in this sub-menu determines the increment amount or decrement amount when adjusting the AM tuner frequency. The initial setting is 9 kHz, and this needs only to be changed if you are using the TX- SR800 in a 10-kHz region.

Advanced Menu

0.Hardware Setup

0-4.AM Frequency Step

a.Frequency Step

:9 kHz

42