Preference
4-2. Headphones Level Sub-menu

If you notice a large difference in the volume when listening to the headphones from when listening to the speakers, you can change the headphone volume level so that you do not have to make adjustments with the main volume dial each time you put on the headphones. The headphone volume can be adjusted between –12 and +12 decibels.

Advanced Menu

4.Preference

4-2.HeadphoneLevel

a.Headphones Level

: 0dB

Quit:SETUP

c. Immediate Display

On: Select to have the screen immediately display certain operations as you perform them (e.g., having the input source displayed whenever an input source selector button is pressed). The display will remain for five seconds after the operation is completed.

Off: Select to turn off the immediate display of operations.

VIDEO 1

d. Display Position

Use this setting to select the position of the immediate display that appears when certain operations are performed. You can position the immediate display at any of ten different levels ranging from the top all the way to the bottom.

e. TV Format

(For all models other than USA and Canadian models)

The default setting is “Auto,” which means that the television format is detected and automatically set by the TX-SR800. However, if you know the correct format, you can use this setting to choose either PAL or NTSC so that no time is wasted on detection.

4-3. OSD Setup Sub-menu

This sub-menu allows you to customize the OSD Setup Menu to display in the manner you desire.

Advanced Menu

4.Preference

4-3.OSD Setup

a.Background Color :Blue1

b.Superimpose Mode :Normal

c.Immediate Display :On

d.Display Position :Bottom

e.TV Format :Auto Quit:SETUP

a. Background Color

Select either Blue1, Blue2, Green1, Green2, Magenta, Red1, or Red2 as the background color when the OSD Setup Menu is displayed.

b. Superimpose Mode

Off: Select to have the OSD Setup Menu displayed on the selected background color.

Hint:

If this is set to “Off,” the background color will not be displayed even when there is no video signal input.

Normal: Select to have the OSD Setup Menu superimposed over the current video if one is displayed or on the selected background color if there is no video signal.

Black: Select to have the OSD Setup Menu displayed on a black background at all times.

4-4. OSD Position Sub-menu

This sub-menu allows you to adjust the position of the OSD Setup Menu as it is displayed on your screen. Depending on the monitor used, there may be cases where the OSD Setup Menu is not displayed in the center and parts of the menus are cut off. To adjust the position of the OSD Setup Menu, simply press the cursor buttons to inch the menu to position you desire.

Advanced Menu

4.Preference

4-4.OSD Position

Exit:RETURN

60