Emerson Process Management 1500 manual 8.3.1Using the Run Filler window, 1 Run Filler window

Using the Filling and Dosing Application

Figures 8-3 through 8-7illustrate the various fill sequences for two-stage discrete filling or three- position analog filling when the fill is paused and resumed at different points in the fill.

Note: The fill total is not held across a transmitter power cycle.

8.3.1Using the Run Filler window

The ProLink II Run Filler window is shown in Figure 8-1.

The Fill Setup, Fill Control, AOC Calibration, Fill Statistics, and Fill Data displays and controls are listed and defined in Table 8-1.

The Fill Status fields show the current status of the fill or the filling application:

•A green LED indicates that the condition is inactive or the valve is closed.

•A red LED indicates that the condition is active or the valve is open.

The Fill Status fields are defined in Table 8-2.

Figure 8-1Run Filler window

68 Micro Motion® Model 1500 Transmitters with the Filling and Dosing Application