OPPO Digital BDP-95 user manual Connect one of these cables

I N S T A L L A T I O N

Connecting to a Receiver/Amplifier with Dolby Digital or DTS Decoder

	Connect one of these cables:
Optical In	Optical Digital Audio Cable
	Coaxial Digital Audio Cable
Coaxial In
	AUDIO/VIDEO MULTI-CHANNEL RECEIVER

Receiver/Amplifier with Dolby Digital or DTS Decoder

Method 6 – Digital Audio Connection

∙Please use either a 75-Ohm coaxial digital audio cable with RCA-style connectors, or an S/PDIF optical digital audio cable to connect one of the digital audio outputs to the corresponding input terminal on your A/V receiver. For the detailed setup of coaxial/optical signals, please refer to page 64.

NOTE

∙Due to bandwidth limitations, high resolution audio formats such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution and DTS-HD Master Audio cannot be sent through the coaxial or optical digital audio output. A reduced resolution version of the same audio track will be output instead. To listen to high resolution audio formats in their best quality, please use the HDMI connection if you have a receiver that handles HDMI audio (see page 14) or use the multi-channel analog outputs if you do not (see page 15).

∙Due to copyright restrictions, SACD audio cannot be sent through the coaxial or optical digital audio output. To listen to SACD, please use the HDMI or analog audio connections.

∙Due to copyright restrictions and bandwidth limitations, full resolution audio from DVD- Audio discs cannot be sent through the coaxial or optical digital audio output. To listen to DVD-Audio in full resolution, please use the HDMI or analog audio connections.

16