OPPO Digital BDP-95 user manual Component Video Connection

I N S T A L L A T I O N

Component Video Connection

Component

Video

Y

Pb/Cb

Pr/Cr

Audio

Rear Panel

Component

Video Cables

Audio Cable

Method 3 – Component Video Connection to TV

∙If your TV has no digital video input but has component video inputs, please use a set of component video cables to connect the component video output of the player to the TV, and remember to set the “Primary Output” option in the setup menu to “Analog” (please see more details on page 55). The connectors are color coded, so please make sure the cable connections match on both ends. The component video connection will produce a very clear picture with high color accuracy.

∙Please use the Red/White audio cables to connect the STEREO AUDIO OUT terminals on the rear panel of the player to the TV. Make sure the audio cables are connected to the same input terminal group on the TV as the chosen component video input.

∙If the “Primary Output” option in the “Video Setup” section of the Setup menu is set to “HDMI 1” or “HDMI 2” (see page 55 for details), the component video connection will not output video when playing a Blu-ray Disc with 1080p 24Hz content, or will only output video with a low resolution (480i/576i) when playing a DVD. This is not a malfunction. You must set “Primary Output” to “Analog” in order to properly use the component video connection.

∙When playing a Blu-ray Disc, video resolution over the component output can be up to 1080i. 1080p content will be interlaced into 1080i signal for the component output.

∙Video up-conversion over the component output is only available for unencrypted discs such as home video and consumer-created contents. Most commercially pressed DVD discs are CSS- encrypted and will be limited to 480i/480p resolution. This restriction applies to the component output only. The HDMI output is protected with HDCP and has no such restriction.

∙You may connect the composite video cable to the TV for trouble-shooting purpose, please refer to page 10 for more details.

13