OPPO Digital BDP-95 user manual Video Setup, Picture Adjustment

S E T U P M E N U O P T I O N S

Video Setup

The “Video Setup” section of the Setup Menu system allows you to configure video output options. The menu items in this section are:

Setup Menu

Playback Setup	Picture Adjustment
Video Setup	Primary Output	HDMI 1
Audio Format Setup	3D Mode	Auto
Audio Processing	3D TV Size	46
Device Setup	TV Aspect Ratio	16:9 Wide
Network Setup	TV System	NTSC
Exit	Output Resolution	Auto

Adjust picture control parameters

Exit

1.Picture Adjustment: To adjust picture control parameters. The OPPO BDP-95 Blu-ray Disc Player provides a wide array of picture controls. Please refer to the Picture Adjustment section on page 58 of this manual for details of each control.

2.Primary Output: To select the primary video output port. The options are:

∙HDMI 1 – Use HDMI 1 as the primary video output port. This setting will ensure that the HDMI 1 output gets the best possible picture quality. The dedicated QDEO DE2750 video processor will be used unless “Source Direct” for output resolution is selected, in which case QDEO DE2750 video processor is bypassed. Component and composite video output may not be available or may be limited to a lower resolution based on content source limitations.

∙HDMI 2 – Use HDMI 2 as the primary video output port. Similar to “HDMI 1”, this setting ensures that the HDMI 2 output gets the best possible picture quality, except that it utilizes the video decoder in the player to perform necessary video processing, not the DE2750 video processor.

∙Analog – Use component video as the primary video output port. This setting will ensure that the component output is always available and displays proper video signals. The video decoder in the player performs any necessary format conversion, and the DE2750 video processor is completely bypassed.

NOTE

Copyright control mechanisms encoded on the disc may limit the output resolution of the component video output. For DVD, if CSS encryption is in use the output resolution is limited to no more than 480p/576p; for Blu-ray Discs, the output resolution is limited to no more than 1080i, and could be lower if the disc contains the Image Constraint Token.

3.3D Mode: To choose the video output mode for available 3D contents at the HDMI output ports. The options are:

∙Auto – Output 3D if supported both by the disc content and the display. The player automatically checks for the existence of 3D content on the disc and the 3D compatibility of

55