Notes:
•The output channel number for most cable boxes and DSS receivers is usu- ally 3 or 4. Check the owner’s manual for your cable box or DSS receiver if you are not sure what the output channel number is.
•If you are using the audio/video jack connections to your cable box or DSS receiver, select VIDEO OUT as the out- put channel.
6.When the following appears on the TV screen, set your cable box or DSS receiver to the local PBS station, then press CH s. (If you do not have a cable box or DSS receiver, simply press CH s.)
AUTO SET
A CABLE
A CABLE
YOUR
THEN. . .
UP KEY
After you press CHs, CH AUTO SET PRO- CEEDING and the current channel number appear on the TV screen as the VCR scans through the channels and memorizes all active channels in your area.
Note: If you have already set the channels and just want to manually set the clock, press MENU to skip tuner programming. Then see “Manually Setting the Clock.”
7.When the VCR finishes scanning and stor- ing channels, it searches for an EDS signal and shows the following on the TV screen:
AUTO CLOCK SET
PROCEEDING
CANCEL: PUSH STOP KEY
It takes up to 10 minutes for the VCR to set the clock using the EDS signal. If the VCR finds a signal, it automatically sets its clock
16
to the correct time and AUTO CLOCK SET COMPLETED appears. If the VCR does not detect a signal within this time, AUTO CLOCK SET INCOMPLETE appears. There is probably not an EDS signal avail- able in your area. Press STOP, then see “Manually Setting the Clock” to set the clock.
Notes:
•Your VCR protects tuner programming for up to 24 hours in case a power failure occurs or if the power cord becomes unplugged. After about 24 hours without power, the VCR loses the programming.
•If you have not connected the VCR to an antenna, cable box, DSS receiver, or other signal source through the IN FROM ANT. jack, the VCR does not store any channel in memory. Instead, you see:
NO CH FOUND
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PUSH VCR CH UP KEY AGAIN
Manually Setting the Clock
Follow these steps to set the VCR to not search for an EDS signal then to manually set the clock.
Notes:
•The clock must be accurately set for proper automatic timer recording. We suggest you refer to a radio station or time/temperature service for the correct time.
•If you do not press a button within 5 min- utes in Steps
