SELECTING THE SIGNAL TO RECORD
You can select the signal to record — from the source connected to the IN FROM ANT. jack or an audio/video source — in either of these ways.
•Repeatedly press INPUT until the desired input source appears — LINE1 (or LINE2) for an audio/video source, or a channel number for broadcast signals.
•Repeatedly press CH s or t to set the VCR to the desired broadcast channel, or to one channel higher than the highest channel number (or one channel lower than the lowest channel number) for an audio/video source.
Note: Select LINE1 for recording signals from the back
RECEIVING/RECORDING STEREO/SAP BROADCASTS (MODEL 63 ONLY)
The Model 63 has three channels for audio re- cording — two (left and right) stereo channels on the
Press DISP/ENT to display the audio programs available on the broadcast you are currently tuned to. STEREO, SAP, and MONO appear on the TV screen, and STEREO and/or SAP might appear on the VCR’s display. On the TV screen, parenthesis appear around each type of audio signal that is not available. For exam- ple, if a station broadcasts mono (monaural) and SAP signals, (STEREO), SAP, and MONO appear on the TV screen and SAP appears on the VCR’s display.
The arrow to the right of the audio mode display indicates the current audio mode. To select the
audio mode when the broadcast has a stereo or SAP signal, repeatedly press
IMMEDIATE RECORDING
Recording a Program
as You Watch It
Follow these steps to record a program as you watch it. If you know how long the program is, you can set how long the VCR records so it stops recording automatically.
Note: If you are watching the program on a TV/ monitor that is connected to the VCR’s R-
1.Turn on the VCR and the TV.
2.Set the TV’s tuner to the same channel as 3 CH. 4 on the back of the VCR.
3.Press TV/VCR until VCR appears.
4.Load a blank cassette, or one that you want to record over, into the VCR.
5.Repeatedly press SPEED on the remote control until the desired recording speed (SP, LP, or EP) appears.
6.Select the signal to record (see “Selecting the Signal to Record”).
7.(Model 63 only) Set the audio recording mode to the desired setting. See “Receiv- ing/Recording Stereo/SAP Broadcasts (Model 63 Only)”.
8.Press REC/TIME. The VCR starts to record and the following appears on the TV screen:
REC 02
TO SET SPECI FI C REC TI ME
PLEASE PUSH REC KEY
33
