40
Monitoring an Automati c Timer Recording
1. Turn on the TV and set it to the same chan-
nel as 3 CH. 4 on the back of the VCR.
Note: If you are using a TV/monitor that is
connected to the VCR’s R-AUDIO-L/VIDEO
OUT jacks, set the TV/monitor to the video
mode.
2. Press TV/VCR until VCR appears.
Checking/Changing Timers
1. Turn on the TV and set it to the same chan-
nel as 3 CH. 4 on the back of the VCR.
Note: If you are using a TV/monitor that is
connected to the VCR’s R-AUDIO-L/VIDEO
OUT jacks, set the TV/monitor to the video
mode.
2. Turn on the VCR and repeatedly press TV/
VCR until VCR appears.
3. Press PROG. You see the set program
menu.
4. Repeatedly press PLAY or STOP to select
TIMER PROGRAM, then press FF. The first
four timer settings appear.
5. Repeatedly press PLAY or STOP to select
the setting you want to change, then press
FF.
6. Follow Steps 9–13 unde r “Setting a Timer”
on Page 38 to correct the selected setting.
7. When you finish, press PROG again, then
turn off the VCR.
Clearing a Timer

If the timer recording has not yet started:

1. Turn on the TV and set it to the same chan-
nel as 3 CH. 4 on the back of the VCR.
Note: If you are using a TV/monitor that is
connected to the VCR’s R-AUDIO-L/VIDEO
OUT jacks, set the TV/monitor to the video
mode.
2. Turn on the VCR and repeatedly press TV/
VCR until VCR appears.
3. Press PROG. You see the set program
menu.
4. Repeatedly press PLAY or STOP to select
TIMER PROGRAM, then press FF. The first
four timer settings appear.
5. Repeatedly press PLAY or STOP to select
the setting you want to clear, then press
ADD/DLT.
6. When you finish clearing the timer, press
PROG.
Turn off the VCR if you still have at least one
timer setting entered.

If a timer recording is in progress:

1. Press POW ER to stop timer recording. TO

CANCEL TIMER REC PUSH POWER

THEN STOP KEY appears if you are

watching the signal from the VCR.
2. Within 10 seconds, press POWER then
press
STOP. TIMER disappears.
2:00
A
08 SP
S
TOP CH SPD
2:00
A
08 SP
STOP CH SPD
16-551.fm Page 40 Tue sday, July 20, 1999 5:13 PM