16-551.fm Page 17 Tuesday, July 20, 1999 5:13 PM

1.Press MENU to display the main menu.

Note: To exit the programming mode at any time, press MENU.

2.Repeatedly press PLAY or STOP to high- light SET CLOCK, then press FF.

3.Repeatedly press PLAY or STOP to high- light MANUAL SET, then press FF.

K

ET

Y

4.Repeatedly press PLAY or STOP to select the correct month, then press FF.

K

:

DST : ON

Y

5.Repeat Step 4 to select the correct date, year, and hour, then press FF.

Note: Your VCR uses a 12-hour clock. Be sure you correctly set AM or PM.

6.Repeatedly press PLAY or STOP to select a minute that is 1 or 2 minutes after the current time, then press FF. (For example, if it is 42 minutes past the hour right now, enter 43 minutes.) This gives you time to complete this procedure before starting the clock.

7.Repeatedly press PLAY or STOP to set DST (daylight saving time) to ON or OFF.

When you set DST to ON, the VCR auto- matically adds 1 hour on the first Sunday in April, and subtracts 1 hour on the last Sun- day in October.

8.Press FF. SET COMPLETED appears.

9.Review the information you entered.

K

12:00PM

DST : ON

Y

If the information is not correct, move the cursor to the incorrect entry by repeatedly pressing REW (with marked to its left) or FF, then enter the correct information.

When the information is correct and the time reaches the minute you set in Step 6, press MENU twice. The time you set appears and the clock starts running.

Note: Seconds begin counting from 00 when you press MENU twice.

Adding/Erasing Channels

We recommend you check the channels the VCR automatically stored. It might have stored distant, weak channels that you normally would not watch, or it might have missed channels you want to store.

If the tuner stores a channel that you do not want, repeatedly press (or hold down) CH s or t to tune to that channel, then press ADD/DLT. CHANNEL nn DELETED appears, and the un- wanted channel is erased from the tuner’s memory.

If you want to add a channel, enter the desired channel number using the remote control’s number buttons. Then press ADD/DLT. CHAN- NEL nn ADDED appears, and the channel is added to memory.

CHANNEL 08 DELE TED

CHANNEL 08 ADDED

17

Page 17
Image 17
Optimus 114 (16-551), 63 (HI-FI) (16-633) owner manual 1200PM, Adding/Erasing Channels