16-551.fm Page 41 Tuesday, July 20, 1999 5:13 PM

DUBBING

The process of recording from one audio/video device to another is called dubbing.

An audio/video device where a signal origi- nates is called the dubbing source. You can use another VCR, camcorder, satellite receiv- er, or other device with A/V outputs as the dub- bing source, connect the dubbing source and the VCR, then use your VCR to record the sig- nal from the dubbing source. Or, you can use this VCR as the dubbing source for another VCR. See “Installation” on Page 9 for the vari- ous possible connections.

Note: Always use video-quality shielded ca- bles with phono-type connectors to connect the device to the VCR. Do not use standard audio patch cords.

Important: Most material performed in public, such as concerts, plays, and movies, or distrib- uted on prerecorded video tapes is copyright- ed. The unauthorized recording or duplication of copyrighted material is a violation of the copyright laws of most countries and such du- plication may result in fines, imprisonment, or both. Note, however, that in the United States, it is not a violation of U.S. copyright laws for a consumer to record a broadcast television pro- gram for private (in-home) viewing.

To dub a tape, start playback on the dubbing source first (see that device’s instructions) then start recording on the recording VCR.

AUDIO-ONLY RECORDING (MODEL 63 ONLY)

Because of the superior quality of VHS Hi-Fi audio recordings, you might want to use your VCR as an audio-only recorder. You can also make live recordings by connecting a pre- amplifier or mixer to the VCR’s AUDIO IN jacks. Simply select the line input and record as usu- al.

Caution: Do not directly connect a microphone to the VCR.

Note: For the best audio fidelity, we recom- mend you use high-quality video tape (such as Cat. No. 44-465) to make audio-only record- ings.

41

Page 41
Image 41
Optimus 114 (16-551), 63 (HI-FI) (16-633) owner manual Dubbing, AUDIO-ONLY Recording Model 63 only