Optimus 63 (HI-FI) (16-633) Changing the On-Screen Language, Resetting the VCR’s Memory

16-551.fm Page 20 Tuesday, July 20, 1999 5:13 PM

The display prompts you to select the cable box’s output channel number. Repeatedly press CH s or t to select the number, then press FF.

VCRTV

OUTPUT CH

Y

5. When you finish, press MENU twice.

SCOPE

E

A: FRANÇA I S

Franç ais

3.Repeatedly press FF so the desired lan- guage appears next to the fourth item.

4.When you finish, press MENU.

Changing the On-Screen Language

Follow these steps to change the on-screen programming language.

1.Press MENU to display the main menu.

2.Repeatedly press PLAY or STOP to high- light the fourth menu selection, then press FF. (The title of the fourth menu selection differs depending on the language cur- rently selected).

NEL

UE: ENGL I SH

Y

English

GE: ESPANOL

Espanõl

Resetting the VCR’s Memory

You can erase all settings (including the time, local channels, and programmed events) at any time. Eject any loaded tape, then hold down PLAY and CHANNEL s on the VCR for about 5 seconds until it turns itself off. All set- tings are cleared.

The next time you turn on the VCR, it performs its initial setup sequence. See “Setting the On- Screen Language/Connection Type/Channels/ Clock” on Page 15.

20