Optoma Technology ES522RFBA, EX530, EX520 manual Setup Network, Network RJ45 Models Only

User Controls

Setup Network

Network (RJ45 Models Only)

Press Enter to apply Network settings. If the connection is successful, the OSD display will show the following dialogue box.

4Network State—to display network information.

4DHCP:On: Assign an IP address to the projector from the DHCP server automatically.

Off: Assign an IP address manually.

4IP Address—Select an IP address

4Subnet Mask—Select subnet mask number.

4projector.Gateway—Select the default gateway of the network connected to the 4DNS—Select DNS number.

4Apply—Press Enter to apply the selection.

41English