Appendices
Problem: Image is reversed.
4Press “Menu”button then select “Display” to adjust the projection.
Problem: Lamp burns out or makes a popping sound
4When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replacethe lamp, follow the procedures in the “Replacing the Lamp”section on page 30.
English
Problem: LED lighting message
Message | Power LED | Temp LED | Lamp LED | |
(Blue) | (Orange) | (Red) | ||
| ||||
Standby State | Off | Off | Off | |
(Input power cord) | ||||
|
|
| ||
Power on | On | Off | Off | |
Power off | Flashing | Off | Off | |
Error (Lamp fail) | Flashing | Off | On | |
Error (Thermal switch) | Flashing | On | Off | |
Error (Thermal | Off | Flashing | Off | |
Error (Fan lock fail) | Flashing | Flashing | Off | |
Error (Over Temp.) | Off | On | On | |
Error | Flashing | Off | On | |
(Lamp Breakdown) | ||||
|
|
|
Problem: Message Reminders
4“Lamp may fail soon! Replacement suggested!” will be shown about 10 seconds when lamp life is going to deplete.
4“Over Temperature” will be shown momentarily before shutdown if system temperature is too high.
4“Fan Fail” will be shown mometarily before shutdown is fan is out of order.
29
