Oregon Scientific PV 100 user manual Shooting Movies, Iso, Speed Description

ISO
				The ISO setting affects the camera's
				sensitivity to light.
				NOTE: An image taken at higher ISO
				speeds may contain more "noise" or
				graininess than an image taken at lower
	MENU		OK	speeds.
SPEED		DESCRIPTION
		The camera sets the speed automatically (default
		setting)

ISO rating 50. Use for very brightly lit scenes

ISO rating 100. Use for brightly lit scenes

ISO rating 200. Use for normally lit scenes

EV (EXPOSURE COMPENSATION SETTING)

Exposure compensation is required when there is an extreme difference in brightness between the background and the subject. Use this setting to manually brighten or darken an image. Default setting is 0.0.

EV	+2.0 / + 1.7 / +1.3 / +1.0 / +0.7 / +0.3 / 0.0 / -0.3 /
	-0.7 /-1.0 / -1.3 / -1.7 / -2.0

SHOOTING MOVIES

The Movie Mode enables you to take movies. The length of the movie that can be taken depends on the amount of memory available within your camera's current memory storage.

18

EN

PV100 Eng R7 a OP 19 9/9/04, 2:45 PM