EN | 2. | Comfort level indicator and trend line. |
| ||
| 3. | Heat index, wind chill and dew point level. |
|
The weather station can connect up to 10 remote sensors.
shows which remote sensor’s data you are viewing.
appears when indoor data is displayed.
The timestamp records the date and time when storing the temperature and humidity readings in memory.
To select the temperature measurement unit:
Press UNIT (at the bottom of the base station) to select °C / °F.
NOTE The unit of all temperature related displays will be changed simultaneously.
To view readings from indoor / outdoor sensors
1. Press SELECT to navigate select the Temperature
or Humidity Area. | will show next to the Area. |
2. Rotate the dial left or right to select the channel.
To view minimum and maximum temperature or humidity:
1.In the Temperature or Humidity Area, press MODE repeatedly to cycle through the readings for:
•Current Temperature
•Heat Index
•Wind Chill
•Dew Point
•Humidity
2.For each of the above readings, press MEMORY
/ ON/OFF repeatedly to toggle respectively between:
•Current / MAX / MIN temperature
•Current / MAX heat index
•Current / MIN wind chill
•Current / MAX / MIN dew point
•Current / MAX / MIN humidity
The timestamp is displayed accordingly in the Clock Area.
To clear the memories and timestamp for the temperature, heat index, wind chill, humidity and dew point readings:
In the Temperature or Humidity Area, press and hold
MEMORY / ON/OFF to clear the readings.
14
