3.6WiJET.G Running as Infrastructure Station

The WiJET.G can run as a Wi-Fi Infrastructure station and join an existing Wi-Fi Wireless Network. The benefits include that several WiJET.G units can join the same wireless network and thus the users can use the one-to-multiple display feature (one PC sending screen image displays to multiple WiJET.G units) For how to configure the WiJET.G running under Infrastructure station mode, please refer to the Web-based Administration Utility Configuration section in Chapter 4.

3.7Start or Resume Your WiJET.G Presentation Session

Once you have successfully configured the wireless card to connect to the WiJET.G and when it is your turn to make a presentation, click “Establish a Session” and you should find yourself connected to the WiJET.G. There will be a confirmation window alerting you that your session is on, and your projector or monitor should now display your Desktop.

Figure 3.17 WiJET.G Presentation Session Manager

Various abnormal conditions, such as RF interference or network time-out, however rare in occurrence, can cause the communication between the WiJET.G and the PSM to be interrupted. If an interruption of session is detected, WiJET.G will automatically try to reconnect and keep the user in session. In case of failing to keep the use in session, WiJET.G will return to the banner page and be available for a new session. Certain abnormal conditions that cause interruption of the link may be localized on the current presenter’s computer and/or its wireless card. If the anomaly persists but can be localized on the current presenter’s computer system, another presenter can still make use of the projector/monitor by clicking the “Establish a Session” button on his/her PSM.

Note: If the PC resolution is above 1024x768, the following message will be displayed.

WiJET.G Technical Manual

13

Page 16
Image 16
OTC Wireless 802.11G WiJET.G Running as Infrastructure Station, Start or Resume Your WiJET.G Presentation Session