OTC Wireless WiSER2400.IP Installation, 1.1.1, Standard Hardware, WiSER2400.Plus, 1.1.2, Power

1.	Installation
1.1.1	Standard Hardware		WiSER2400.IP	WiSER2400.Plus
	1		WiSER2400.IP radio	1 WiSER2400.PLUS radio
	1		RS232-P cable	1 DIN Rail Mounting Assembly
	1		RS232-C cable
		1 ac-dc power adapter
		1 pair of Velcro mounting pads
1.1.2	Power		WiSER2400.IP	WiSER2400.Plus
		Uses 5V DC for input power. An AC-to-DC power		Uses 5V DC to 32V DC for input power (to be supplied
		adapter is provided.		by user). See Fig. 4 for an illustration on how to
				connect the power input to the mini-Phoenix
				connector.

1.1.3 Serial Connections	WiSER2400.IP
	The WiSER2400.IP has a built-in RJ-45 connector and
	uses an RJ-45 to DB-9 adapter cable for connecting to
	the serial port of a PC or a device. Two cables are
	included in the package:
	The RS-232-P cable is for connecting the
	WiSER2400.IP to the RS232 port of DCE equipment
	(whiteboard, instrument, etc.) during communication.
	It terminates in a male DB-9 connector and is labeled
	“Board” on the cable.
	The RS-232-C cable is for connecting the
	WiSER2400.IP to a computer or DTE equipment
	during configuration using the administrative software.
	It terminates in a female DB-9 connector and is
	labeled “Computer” on the cable

WiSER2400.Plus

For RS-232 Connection

WiSER2400.Plus has a built-in DB-9 connector for RS-232 connection. User is to provide the proper RS- 232 cable for connection to a PC or a device.

Use a null-modem serial cable to connect the WiSER2400.Plus to a PC.

Use a straight-thru serial cable to connect the WiSER2400.Plus to a DCE device

For RS-485/422 Connection

Please refer to Fig. 4 for connecting the RS-485 and RS-422 data lines to the mini-Phoenix connector on the WiSER2400.Plus.

WiSER 2400 Technical Manual Version 2.16 Copyright  2001-2005, OTC Wireless, Inc. All Rights Reserved Page 6 of 32