Outback Power Systems FX 2024 T installation manual SERIES/PARALLEL Quad FX System

SERIES/PARALLEL QUAD FX SYSTEM

•All AC wiring from the AC source and to the AC loads must collectively handle 120 amps AC or more.

•All other AC wiring must handle a capacity of 60 amps AC (Mobile FX AC wiring must handle 30 amps).

•This system can continuously power eight 14.4kW of loads depending on which model is used.

•Connecting more power than the continuous rating of the FX may cause breakers to trip or the FX to shut off its AC output.

•A HUB, MATE, and FW-X240 must be connected to successfully stack these FXs in series/parallel.

Notes:

• Program the lowest-installed FX as the Master (1-2ph MASTER), the first Slave as an Outback L1 Slave

23