Welcome to the OutBack Power Systems FX Series Inverter/Charger System
The FX Series Inverter/Charger offers a complete power conversion
OutBack Power Systems does everything possible to assure the components you purchase will function properly and safely when installed as instructed according to local and national electrical codes (NEC). Please read all of the following instructions and the instructions that come with any other OutBack components that make up your power system. Further instructions on individual FX set- ups as well as systems assemblies are included with the FLEXware manuals.
•The
•All Mobile FX Series Inverter/Chargers are ETL listed to UL 458.
The FX and VFX Series Inverter/Charger Installation Manual covers the following information:
•Safety
•FX parts, standard and optional
•Initial inspection of the component
•Preparing the mounting surface
•Fastening the FX to the mounting surface
•General electrical information
FX Series Inverter/Charger Models
Sealed Units (designed for harsher environments, but still require overhead and sidewall protection)
•FX 2012 T (12 VDC/2000 VA)
•FX 2024 T (24 VDC/2000 VA)
•FX 3048 T (48 VDC/3000 VA)
Vented Units (designed for more protected environments)
•VFX 2812 (12 VDC/2800 VA)
•VFX 3524 (24 VDC/3500VA)
•VFX 3648 (48 VDC/3600VA)
Each model FX has a single phase output marked with this symbol:
Each inverter puts out a sine wave waveform marked with this symbol:
Parts Included
•One FX Series Inverter/Charger
•One “WARNING ELECTRICAL SHOCK” sticker to place on the exterior of the FX
•One packet of silicone grease to protect CAT 5 cable connections
•One installation manual
•One programming manual
•One Turbo Kit (sealed units)
•One DC Wiring Cover or DCC (vented units)
2