LOW VOLTAGE TERMINALS
Control Terminal 
Wiring Block
Jumper 
INVERTER ON/OFF: 
allows for manual switch to control the FX (default operation is “ON”); controlled by the MATE when the installed jumper connecting these terminals is present.
����������
��������������
�����������������
�����������������
�������������
��������� |
|
| ||
��������������� �������� ������ ���� | ���� | ���� | ���� |
|
������������ |
|
|
| |
�������� |
|
|
| |
������� ���� �� | ��� | ������ �������� | ����� | ����� |
Note: Keep Control
Wiring Terminal Block screws tight and the block itself secured tightly to AC Board. Otherwise, the FX can malfunction. The Terminal Block can be unplugged for easier wire 
installation and removal/ reinstallation of the FX.
AUX OUTPUT (AUX+/AUX-): 12VDC
at 0.7 amps (8.4 watts) maximum is available at these terminals; the AUX’s default is to drive cooling fans or the Turbo Fan.
XCT+/ECT- are non- operational terminals (do not connect).
10
