Outback Power Systems FX 2012ET, Outback Power Systems FX ACCESSORIES, FXA ACCESSORY KIT, FX-ACA(AC CONDUIT ADAPTER), FX-DCA(DC CONDUIT ADAPTER), FX-DCC(DC COMPARTMENT COVER)

FX ACCESSORIESFX-ACA (AC CONDUIT ADAPTER)

This plastic box slips into grooves on the AC end of the FX. This adapter extends the AC wiring compartment to match the PSAC or PS2AC. It also provides more room for wiring than is available when using the supplied flat knockout plate.

There is a 2-inch TSC cut-out on the plastic box to allow it to be used with the

PSAC or PS2AC disconnect enclosure.

FX-DCA (DC CONDUIT ADAPTER)

The FX-DCA allows the connection of 2-inch TSC conduit to the FX. It fits on the opposite end of the FX from the AC wiring compartment. The location of the 2- inch conduit opening matches the 2-inch knockouts provided in the PSDC or PS2DC enclosure.

When installing an FX with a PSDC or PS2DC disconnect enclosure, both the

FX-DCA and FX-DCC are required.

FX-DCC (DC COMPARTMENT COVER)

The FX-DCC covers the DC terminal area and allows a space which can be used to mount other components such as a DC current shunt. The FX-DCC can be used with or without the FX-DCA.

When installing an FX with a PSDC or PS2DC disconnect enclosure, both the

FX-DCA and FX-DCC are required.

FXA ACCESSORY KIT

The FXA includes all three of these FX accessories in one box.

Copyright 2003  OutBack Power Systems, Inc.	FX & VFX “E” Series Inverter/Charger System	Installation & Programming Manual
19009 62nd Ave NE, Arlington WA 98223 USA		Page 15
Tel 360 435 6030 Fax 360 435 6019	Rev 7.0 07/02/04