Outback Power Systems FX 2012ET, Outback Power Systems Variable “Soft” Keys, System Controller and Display

MATE - SYSTEM CONTROLLER AND DISPLAY

OutBack MATE

System Controller and Display

	AC Input	Inverter
	AC Input	LED Indicator
	LED Indicator	LED Indicator
	LED Indicator	(green)
	(yellow)	(green)
	(yellow)
	Dedicated	Dedicated
	AC Input	Inverter
	Control	Control
	“HOT” Key	“HOT” Key

Variable “Soft” Keys

Each one of the soft keys corresponds to a word

on the bottom line of the LCD display

The menu system displayed on the MATE will vary depending on the software version that the MATE was programmed with at the time of manufacturing or during its last software upgrade. For your particular menu system, consult your MATE manual.

The following pages show the portion of the menu structure that relates to the FX. Most of the menu will be consistent no matter what type of FX you have purchased. The MATE displays that follow are from the most current MATE being sold by OutBack Power Systems.

The DC voltage values (the letters “vdc” usually follow these values) shown in the following MATE displays will be the default values for a 12V version of the “Export” FX. For the 24V version, multiply these values by 2. For the 48V version, multiply these values by 4. This multiplication process includes the incremental values (when changing a voltage setting you will use the ‘increment’ (INC) or decrement (DEC) buttons). For example, for a 12V FX the increment value is 0.1V. A 24V FX has an incremental value of 0.2V and a 48V FX has an incremental value of 0.4V.

All values displayed in the “Setup” and “Advanced” menus are the default values unless otherwise stated.

For “M” versions of the MATE (example: MATE 2”M”), only the “Status” and “Advanced” menus are the same as non- “M” versions of the MATE. If you are using an “M” version of the MATE, please consult the MATE manual for proper navigation and screen information.

Copyright 2003  OutBack Power Systems, Inc.	FX & VFX “E” Series Inverter/Charger System	Installation & Programming Manual
19009 62nd Ave NE, Arlington WA 98223 USA		Page 27
Tel 360 435 6030 Fax 360 435 6019	Rev 7.0 07/02/04	Page 27