Packard Bell iPower GX Disassembly Manual
10
Hard Disk Drive
To remove the hard disk drive(s), first remove the battery (see Battery on page 4) and then perform
the following steps:
1. Loosen the screws securing the hard disk drive bay cover (the screws cannot be removed).
Fig. 15 Location of the hard disk drive bay cover screws.
2. Use the thumb notch to lif t the bay cover and remove it. Be careful not to break off the ta bs
located on the end of the cover opposite the thumb n otch.
Fig. 16 Removing the hard d i sk drive bay cover .