Packard Bell GX Keyboard

Packard Bell iPower GX Disassembly Manual

3. Release the multimedia board and lift the board from the right; the multimedia board is still

connected to the volume control board by means of a flat cable.

Fig. 31 Releasing the multimedia board.

4. Lift the black clip securing the volume control board flat cable and disconnect the cable

from the header on the multimedia board.

Note:

If needed, release the blac k clip securing the flat cable (with the blue end) and dis connect the cable from the

header on th e multimedia board.

Keyboard

To remove the keyboard, first remove the keyboard cov er (see Keyboard Cover on page 13) and

then perf orm the followi ng steps:

1. Remove the five keyboard screws.

Fig. 32 Location of the keyb o ar d s cr e ws.

Note:

The keyboard is secured with two long and three short screws. Note the location of the long scr ews.

2. Lift the back edge of t he keyboard slightly and then slowly slide i t to ward the LCD pane l to

release the keyboard retaining tabs located on the front edge of the keyboard.

Fig. 33 Releasing the k eyboard.