Intro duction to your Zodiac Console

Charging the battery

Charging the battery

To use your Zodiac console, you must connect it to an AC outlet and charge the battery.

1.Connect your console to an AC outlet using one of these three setups:

Desktop Setup. Connect the optional HotSync cradle (sold separately) to the HotSync cable, your computer, and an outlet as described in the cradle instructions, and then insert your console in the cradle.

Travel Setup. Connect the HotSync cable to your computer and an outlet as described on page 13, and then connect your console to the HotSync cable.

Ultra-light Setup. Connect the power adapter cable to your console.

Travel Setup

Ultra-light Setup

2.Wait approximately 2 hours for the battery to fully charge.

While your console charges, the LED is yellow. When your console is fully charged, the LED turns green.

When your console needs to be recharged, the LED blinks and turns yellow. When the LED turns red, your battery is extremely low.

Using Your Zodiac Console 14

Page 14
Image 14
Palm Zodiac manual Charging the battery