Palsonic TFTV935S owner manual Connect a VCR, To play VCR

Connections (continued)

Connect a VCR

SCART Cable

21 -pin SCART connector

Rear of the VCR

VCR

How to connect:

Connect the SCART Cable between the unit and the VCR.

To play VCR

1.Turn on your LCD TV, press SOURCE button on the remote control.

2.Push ENTER (Up/Down) to select Scart2 AV and press ENTER to confirm.

3.Turn on your VCR, insert a videotape and press the Play button.

Select Main Source

1.TV

2.Video

3.S-Video

4.SCART 1

5.SCART 2 AV

6.SCART 2 Y/C

7.YPbPr

8.D-Sub

9.HDMI

Note:

The unit receives CVBS (VIDEO) signal and Y/C (S-VIDEO)signal from SCART2 interface.

When receiving Y/C signal, you need to select Scart 2 Y/C instead of Scart 2 AV in the source select menu. Therefore, if you find that the colour is not properly displayed, please try to select Scart 2 Y/C.

To connect to external devices with AV terminals, you may use 2 I-pin Scart Converter to connect to SCART interface on the unit, then please select Scart 2 AV and the unit receives CVBS (VIDEO) signal only.

10