Palsonic TFTV935S Basic Operation, Changing Channels, Adjusting the Volume, Muting the Sound

Basic Operation

Changing Channels

Using the Channel Buttons (CHANNEL +/-)

Press the CHANNEL +/- to change channels.

When you press the CHANNEL +/- , the unit changes channels in sequence. You will see all the channels that the unit has memorised.

You will not see channels that were skipped.

Direct Accessing Channels

Press the number buttons to go directly to a channel. To select a one-digit channel:

Input the channel number by using the 0-9 number buttons directly. To select a two-digit channel:

Press -/-- to display "- -" and input the channel number by using the 0-9 number buttons. To select a three-digit channel:

Press -/-- to display "- - -"and input the channel number by using the 0-9 number buttons.

Note:

When you use the number buttons, You may directly select channels that were skipped.

Using the RETURN button

Press this button to switch between the current channel and the previous channel.

Adjusting the Volume

Using the volume buttons (VOLUME +/-)

Press the VOLUME + or VOLUME - to increase or decrease the volume.

Muting the Sound

Using the MUTE button

At any time, you can temporarily turn off the sound using the MUTE button.

1 Press the MUTE	button and the sound turns off.
2 To turn mute off, press the MUTE button again.
Select Input Source Signal
1 Press SOURCE	to access source select menu.
		Select Main Source
2 Press ENTER (Up/Down) to select a desired signal source.		1. TV
		3. S-Video
		2. Video
You may directly press the relevant number button to select a desired		4. SCART 1
signal source.		5. SCART 2 AV
3 Press ENTER to confirm.		6. SCART 2 Y/C
		7. YPbPr
		8. D-Sub
TV ------------------	select TV signal.	9. HDMI
Video --------------	select signal from Video terminal.
S-Video	select signal from S-Video terminal.
SCART1 ----------	select signal from 21-PIN SCART 1 interface.
SCART2 AV -----	select signal from 21-PIN SCART 2 interface.
SCART2 Y/C ----	select SCART 2 YC when viewing Y/C signal from 21-PIN SCART 2 interface.
YPbPr -------------	select signal from YPbPR or YCbCr terminals.
D-Sub -------------	select signal from D-Sub (I 5-pin D-sub) terminals.
HDMI --------------	select signal from HDMI/DVI terminals.

Note:

When you select to view program from SCART2 and find the colour is not properly displayed, maybe the unit is receiving Y/C signal. To properly display the picture's colour. please select Scart2 Y/C instead of Scart2 AV When using 21 pin Scart Converter to connect SCART2 interface on the unit with your extended devices, please select Scart 2 AV in source select menu.

19