Volume adjustment during shooting

Adjusting the volume

AUDIO MON/ADV

When monitoring sound with headphones while shooting, volume can be adjusted with the <AUDIO MON/ADV> button.

••Adjusting the input sound level (Page 43).

••The adjusted sound level is remembered when power is switched off by turning the POWER/ MODE switch <OFF>.

Index recording (AVCHD mode only)

This is a function that adds indexes to image points in a clip while shooting or playing back.

When the USER button assigned to the [INDEX] function is pressed during shooting, an index signal is recorded at that point. (Page 87)

It is also possible to add indexes during playback, or to display/play back only clips with indexes. (Page 60)

•A maximum 100 indexes can be recorded to a single clip.

•When exceeding 100 indexes, even though the attachment operation is performed, [INVALID] is displayed and an index cannot be added.

•When continuously adding indexes, do so at intervals of one second or more. Even if the operation is performed continuously within one second, only the first operation will be valid.

Shooting

Shot mark function

The mark attached to the thumbnails of clips is called a shot mark. On the thumbnail screen, only clips with shot marks attached can be selected and displayed/played back.

During shooting, when the USER button assigned to the [SHOT MARK] function is pressed, [MARK ON] is displayed on the LCD monitor and the viewfinder, and a shot mark is set on the thumbnail of the clip being shot. Press the button again to release it.

Also, shot marks can be set/released by performed the thumbnail operations of the clips. (Page 57) However, shot marks cannot be set/released while playing back.

••When shotmarks cannot be set/released, [INVALID] is displayed.

[LAST CLIP] function

When [LAST CLIP] is assigned to a USER button, the last recorded clip can be deleted by pressing the button.

When the USER button assigned to [LAST CLIP] is pressed, [YES]/[NO] is displayed on the screen. Select [YES] to delete the last recorded clip.

••Select [NO] not to delete the clip.

••You cannot delete clips if the following operations are performed after shooting.

-When switched to <PB> mode

-When changing the recording format

-When connecting to a computer using a USB cable

-When powering off the camera

-When opening the memory card slot cover

••When in SIMUL REC mode the function does not operate.

29