Item

Display

 

Description of settings

mode

 

 

 

 

 

 

 

 

 

 

 

 

[INTERVAL

<CAMERA>

Scenes changing slowly over a long period are recorded as short movies by

REC]

(AVCHD

providing a recording interval. One frame is recorded in each recording time

 

mode only)

period that has been set, and in the AVCHD mode 24 frames (PAL 25 frames)

 

 

form a one-second video.

 

 

[OFF], [1SECOND], [10SECONDS], [30SECONDS], [1MINUTE], [2MINUTES]

 

 

When INTERVAL REC is enabled, set the recording format as follows. If the

 

 

recording format is not set to the following, the [INTERVAL REC] item of the

 

 

[RECORDING SETUP] screen is grayed out and cannot be enabled.

 

 

When [SYSTEM FREQ] = [59.94Hz]: [PH 1080/24P]

 

 

When [SYSTEM FREQ] = [50Hz]: [PH 1080/25P]

 

 

•When set to [PH 1080/24P], TC RECRUN is fixed to NDF.

 

 

•The maximum shooting time is 168 hours.

 

 

•Audio recording is disabled.

[TIME STAMP]

<CAMERA>

Enables a function to superimpose [DATE]/[TIME] information over the shot

 

 

images.

 

 

 

 

 

[ON]:

The information set in the [DATE]/[TIME] item is superimposed.

 

 

[OFF]:

Date and time information are not superimposed on the image.

[PS/PH AUDIO

<CAMERA>

Selects the format of audio recording when [REC FORMAT] = PS/PH.

MODE]

(AVCHD

[LINEAR PCM]: Recording is performed in uncompressed LPCM.

 

mode only)

[Dolby Digital]: Recording is performed in Dolby Digital.

 

 

•The camera is fixed to Dolby Digital other than PS/PH mode.

 

 

•Content recorded with [LINEAR PCM] cannot be played back on our previous

 

 

model.

 

 

 

 

 

 

 

 

[AUDIO

<CAMERA>

Enables the limiter function on CH1 audio input.

LIMITER CH1]

 

[ON]:

Level is reduced only when input exceeds limit (adjustable using

 

 

 

<AUDIO LEVEL> knob).

 

 

[OFF]:

No limiter (adjustable using <AUDIO LEVEL> knob)

[AUDIO

<CAMERA>

Enables the limiter function on CH2 audio input.

LIMITER CH2]

 

[ON]:

Level is reduced only when input exceeds limit (adjustable using

 

 

 

<AUDIO LEVEL> knob).

 

 

[OFF]:

No limiter (adjustable using <AUDIO LEVEL> knob)

[MIC GAIN1]

<CAMERA>

Sets the input level of the external microphone connected to the AUDIO INPUT1

 

 

terminal.

 

 

 

 

 

[-40dB], [-50dB], [-60dB]

[MIC GAIN2]

<CAMERA>

Sets the input level of the external microphone connected to the AUDIO INPUT2

 

 

terminal.

 

 

 

 

 

[-40dB], [-50dB], [-60dB]

 

 

 

 

 

is the factory default mode.

90