[AV OUT SETUP] screen
Item | Display |
|
| Description of settings |
mode |
|
| ||
|
|
|
| |
|
|
|
|
|
[SDI&HDMI | <CAMERA> | Sets the video format of the <SDI OUT> and <HDMI> output. | ||
OUT SEL] | <PB> | [1080i/720P]: | Outputs at the resolution set in [REC FORMAT]. Outputs at | |
| (AVCHD |
|
| 1080/60i or 1080/50i in PS mode. |
| mode only) | [DOWN CONV]: | When [SYSTEM FREQ] = [59.94Hz], <SDI OUT> is output | |
|
|
|
| at 480i, while <HDMI> is output at 480P. When [SYSTEM |
|
|
|
| FREQ] = [50Hz], <SDI OUT> is output at 576i, while |
|
|
|
| <HDMI> is output at 576P. |
[SDI OUT] | <CAMERA> | Sets the video output from the <SDI OUT> terminal. | ||
| <PB> | [ON]: | Video is output from <SDI OUT>. | |
|
|
| During this time, simultaneous LCD monitor and viewfinder display is | |
|
|
| not supported. When using the viewfinder, please close the monitor. | |
|
| [OFF]: | No video is output from <SDI OUT>. | |
[SDI 24PsF] | <CAMERA> | Sets the video format output from <SDI OUT> to 24PsF. | ||
| <PB> | [ON]: | Operates only when [REC FORMAT] = 1080/24P. If it is set to [ON], | |
| (AVCHD |
| VFR operation is disabled. During 24PsF output, HDMI output is | |
| mode only) |
| halted. |
|
|
| [OFF]: | SDI output is in the 1080/60i format. | |
|
| ••When [SYSTEM FREQ] = [50Hz], this item is not available. | ||
|
|
| ||
[SDI EDH] | <CAMERA> | Sets superimposition of EDH onto the <SDI OUT> during <SDI OUT> output. | ||
| <PB> | [ON]: | Superimposes EDH. | |
|
| [OFF]: | Does not superimpose EDH. | |
|
|
| ||
[DOWNCON | <CAMERA> | Switches | ||
MODE] | <PB> | [SIDE CROP]: | Crops the left and right edges. Images output from the | |
| (AVCHD |
|
| external output terminals <VIDEO OUT>, <HDMI>, <SDI |
| mode only) |
|
| OUT> will have portions which extend beyond the edges of |
|
|
|
| the screen and cannot be seen. |
|
| [LETTER BOX]: | Adds black bands at the top and bottom of the image. | |
|
| [SQUEEZE]: | Squeezes images horizontally. | |
[HP MODE] | <CAMERA> | Selects the sound heard from the headphones. | ||
|
| [LIVE]: |
| The sound input from the microphone is output as is. This |
|
|
|
| setting is selected when delays in the sound are annoying. |
|
| [RECORDING]: | The sound in the status to be recorded (the sound | |
|
|
|
| synchronized with the images) is output. |
[TEST TONE] | <CAMERA> | Sets test tone output to channels 1 and 2 when BARS setting is ON. | ||
|
| [LEVEL1]: |
| Outputs the 1 kHz test tone. |
|
| [LEVEL2]: |
| Test tone is output at lower volume than LEVEL1. |
|
| [OFF]: |
| Does not output the test tone. |
is the factory default mode.
92