Setting user information

Setting user information allows you to store 8-digit memo information in the hexadecimal format. User information is automatically saved in the memory and retained after you turn off the power.

In DV mode, [USER]/[TIME]/[DATE]/[TCG]/[FRAME RATE] can be selected with the [UB MODE] item on the setup menu [TC/UB SETUP] screen. Select [USER] to set user information in DV mode.

1Turn the POWER/MODE switch of the camera <ON>. (Page 30 of Vol.1)

2Select the [UB PRESET] item on the setup menu [TC/UB SETUP] screen.

••Menu operation (Page 31 of Vol.1)

••Operations can be performed with buttons on the remote control that correspond to those on the camera. For details, see “Remote control” (Page 24 of Vol.1).

3Tilt the OPERATION lever in the <> direction to move to [YES], and push the OPERATION lever.

4Set the user information.

Tilt the OPERATION lever in the <><> directions to select user information characters.

••You can set numbers from 0 to 9 and letters from A to F for the user information.

Tilt the OPERATION lever in the <> direction to move to the next digit, and tilt in the <><> directions again to select the character.

•You can reset the user information to zero by pressing the <RESET/TC SET> button while setting the user information.

5When finished setting the user information, push the OPERATION lever.

6Tilt the OPERATION lever in the <> direction to move to [YES], and push the OPERATION lever.

Shooting

53