Playback settings [PLAY SETUP]
Make settings for playback format and method.
Setting playback format [PB FORMAT] (only in AVCHD mode)
Set format for playback.
1Press the <MENU> button. Menu operation (Page 31 of Vol. 1)
2Select the [PB FORMAT] item in the [PLAY SETUP] screen, and push the OPERATION lever (or tilt in the 
direction).
3Tilt the OPERATION lever in the <
><
> directions to select the format for playback, and push the OPERATION lever.
••The setting for the [REC FORMAT] item on the setup menu [RECORDING SETUP] screen is reflected as the initial setting.
••Clip numbers will be displayed in black where playback is possible, and in red where playback is not possible.
••Even if the playback format is set, the recording format set in the [REC FORMAT] item on the setup menu [RECORDING SETUP] screen is restored when the camera is switched to <CAMERA> mode.
••If the playback format does not conform to the clips created at the relay destination using the relay recording function, thumbnail images will not be displayed ([!] will be displayed). Thumbnail images will be displayed when the playback format is matched to the clips.
Repeat playback [REPEAT PLAY]
Use this setting to repeatedly play back all available clips on the selected slot.
1Press the <MENU> button. Menu operation (Page 31 of Vol. 1)
2Set the [REPEAT PLAY] item in the [PLAY SETUP] screen to [ON].
3Press the <MENU> button to return to the thumbnail screen.
The repeat playback indicator will be displayed. When the playback operation is performed, the playable clips are played back repeatedly.
••Repeat playback will continue until playback is paused.
••To turn the repeat playback setting [OFF], select [OFF] in step 2.
58