Storing scene files and other settings on memory cards

You can save up to four scene file settings or other settings as files on a memory card, and you can also load them from the memory card.

••In the case of the scene files, the current settings are automatically saved in the camera, and the saved data is written on a memory card. When the data has been read from a memory card, the current settings are rewritten at the same time as the data saved inside the camera.

••The data in all the scene files, <F1> to <F6> is rewritten.

The following description basically describes storing scene files.

1Turn the POWER/MODE switch of the camera <ON>. (Page 30 of Vol.1)

2Select the slot number for the memory card onto which you wish to save from the [CARD WRITE] item on the setup menu [SCENE FILE] screen, and push the OPERATION lever.

For other settings, select the [USER FILE] screen. (Page 96)

••Menu operation (Page 31 of Vol.1)

••Operations may be performed with buttons on the remote control that correspond to those on the camera. For details, see “Remote control” (Page 24 of Vol.1).

3Tilt the OPERATION lever in the <><> <><> directions, select a file, and push the OPERATION lever to set the file name.

4Push the OPERATION lever again, select [YES] when the following screen appears, and push the OPERATION lever.

••In the following example, [SCENE-01] is the TITLE name. To change the TITLE name, see the following description.

••“FILE 1 (file name) WRITE COMPLETED” is displayed when writing is complete.

46