TV/Monitor

Only the output signals from the camera are shown.

HDMI cable (optional)

BNC cable (optional)

Video pin cable (optional)

Audio pin cable (optional)

White: CH1(LCH) audio

Red: CH2(RCH) audio

TV/Monitor

Connect the one that matches the terminal of TV/monitor

„„When outputting video and audio signals from the camera to an external device, connect to the input terminals of the external device.

••Use an HDMI cable (optional) with double-shield or higher.

••It is recommended that you use an HDMI cable manufactured by Panasonic.

••This camera is not compatible with VIERA Link.

••Use a BNC cable (optional) with double-shield that is equivalent to 5C-FB to connect to <SDI OUT> terminal.

„„Limitations of image output

••When using <SDI OUT> output, the LCD monitor and the viewfinder cannot be displayed simultaneously. In order to display them simultaneously, set the [SDI OUT] item on the setup menu [AV OUT SETUP] screen to [OFF]. When the [EVF MODE] item on the setup menu [DISPLAY SETUP] screen is set to [AUTO], the viewfinder display disappears upon opening/closing of the LCD monitor.

••No <HDMI OUT> and <VIDEO OUT> will be output when the [REC FORMAT] item in the [RECORDING SETUP] screen is set to [PH 1080/24P], and the [SDI 24PsF] item in the [AV OUT SETUP] screen is set to [ON].

••Some displays, such as time code display and audio level meter display may not be visible on the videos output from the output terminal.

70