Main warning displays
The main warning displays appearing on the LCD monitor or viewfinder are as follows. If a warning display is not listed, carefully check the message displayed.
[ALL DATA WILL BE DELETED. (INCLUDING CLIP OF AVCHD) FORMAT THE CARD NOW? (SLOT1)]
If you format the memory card, all the recorded data will be deleted. (Including AVCHD clips.) Do you format the memory card? (SLOT1)
C[CANNOT BE USED DUE TO INCOMPATIBLE DATA.]
Cannot be used because the standard for the data is different.
[CANNOT DELETE.]
Clip cannot be deleted.
[CANNOT DELETE WITH THIS BUTTON]
Clip cannot be deleted.
[CANNOT PLAY.]
No playback is possible.
[CANNOT PLAY WITH THIS BUTTON]
No playback is possible.
[CANNOT RECORD PH MODE INTO THIS CARD. PLEASE CHANGE THE REC FORMAT.]
This memory card cannot be recorded to in PH mode. Change the recording format.
[CANNOT RECORD. THE NUMBER OF CLIPS HAS EXCEEDED THE MAXIMUM LIMIT.]
The maximum number of clips has been reached and no further clips can be recorded.
[CANNOT SET THE NUMBER OF INDEXES HAS EXCEEDED THE MAXIMUM LIMIT.]
No further indexes can be set because the number of indexes will exceed the maximum limit.
[CANNOT SET
[CARD DOOR OPENED.]
The memory card door is open.
[CARD ERROR. PLEASE REFORMAT.]
Formatting has failed. This memory card needs to be reformatted.
[CARD FULL.]
The memory card is full.
[CHECK CARD.]
Please check the memory card.
If a memory card that has been used before in another device or computer is used for the first time in this camera, [CHECK CARD.] is displayed, and all operations may be disabled.
In such a case, perform the following:
1)Remove the memory card from the camera and insert it again. (Page 15)
The camera recognizes the memory card and cancels the [CHECK CARD.] display.
2)If the [CHECK CARD.] display is not disappeared even after removing and inserting the memory card several times, check the contents of the memory card on a computer, and erase all the data.
3)Format the memory card with the camera. (Page 13)
If the data on the memory card cannot be either read or erased on a computer, the memory card may be damaged. Use another memory card.
[CONTROL DATA ERROR HAS BEEN DETECTED.]
An error has been detected in the control information.
D[DISCONNECT USB CABLE.]
When turning off the power, disconnect the USB connection cable.
I[INCOMPATIBLE CARD. PLEASE CHECK CARD.]
Displayed when the writing speed of the memory card in use is slow and recording may not be performed.
80